Emergency Stop Switches

Ultra compact emergency switches
panel cut-out Ø 22 mm

Features & benefits:

• Ultra compact emergency stop switches with Ø22 mm bushing
• Low behind-the-panel depth
• Front sealing: IP65
• Approved according to EN 60947-5-1, EN 60947-5-5

HN Series Emergency Stop Switches

Unique “Safe Break Action”

IP65 degree of protection

Features & Benefits

• Safety lock mechanism
• Direct opening action mechanism
• Unibody. Finger-safe terminals

HW Series Emergency Stop Switches (Unibody)

Unique safety mechanism

IP65 Degree of Protection.

Features & Benefits

• Finger-safe terminals. Ensure safety and wiring time.
• Safety lock mechanism (IEC 60947-5-5, 6.2)
• Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1, Annex K)

HW Series Emergency Stop Switches (with Removable Contact Block)

Unique Safety Mechanism

22mm hole size with finger-safe structure.

Features & Benefits

• Complete with finger-safe contact blocks. Ensure safety and wiring time.
• Safety lock mechanism (IEC 60947-5-5, 6.2).
• Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1).

SEMI Emergency Off (EMO) Switches

Removable contact block with 16 mm/ 22 mm hole size

Features & Benefits

• Direct opening action mechanism
• Safety lock mechanism
• Safe Break Action (XA/XW Series)
• Reverse Energy Structure (XA/XW Series)
• The combination of IDEC’s EMO switch guards and emergency stop switches are approved by TÜV Rheinland for compliance with SEMI S2 standards.

Stop Switches

Wider variety with yellow button, white guard and nameplate

Unibody with IP65 degree of protection.

Features & Benefits

• According to SEMI S26-0308 Environmental, Health, and Safety Guideline for FPD Manufacturing Systems published in March 2008, the combination of a red button and yellow background cannot be used for switches that have only local or partial shutdown functions. IDEC’s yellow button switch, white switch guard, and nameplate can satisfy the requirement.

X6 Series Emergency Stop Switches (Unibody)

Smallest in its class.

Third-generation emergency stop switch with Reverse Energy Structure.

Features & Benefits

• Two button sizes: 30mm and 40mm
• Two button colors: Red for emergency stop switch and yellow for stop switch
• Two ways of resetting: Pulling and turning.
• UL, c-UL recognized, EN compliant.
• Safety lock mechanism (IEC 60947-5-5; 6.2)
• Direct opening action (IEC 60947-5-5; 5.2, IEC 60947-5-1)
• Degree of protection: IP65 (IEC60529)

XA Series Emergency Stop Switches (Unibody)

16 mm hole size with pushlock pull/ turn reset.

Small, unibody emergency stop switches suitable for equipment with small mounting space.

Features & Benefits

• ø29mm and ø40mm mushroom operators
• Degree of protection IP65 and IP40 (IEC 60529)
• Dark red (Munsell 5R4/12) and bright red (Munsell 7.5R4.5/14) for operators of emergency stop switches, and yellow/gray for stop switch operators.
• Gold-plated crossbar contacts
• Push-to-lock, pull or turn-to-reset operator
• UL, c-UL recognized. EN compliant.
• Safety lock mechanism (IEC 60947-5-5, 6.2)
• Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1)

XA Series Emergency Stop Switches (with Removable Contact Block)

Safety lock mechanism with IP65 degree of protection

The world’s first 16mm, 4-contact emergency stop switch.

Features & Benefits

• The depth behind the panel is only 27.9 mm for 1 to 4 con tacts, both on illuminated and non-illuminated.
• IDEC’s original “Safe break action” ensures that the contacts open when the contact block is detached from the operator.
• 1 to 4NC main contacts and 1NO monitor contact
• Push-to-lock, Pull or Turn-to-reset operator
• Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1)
• Safety lock mechanism (IEC 60947-5-5, 6.2)
• Degree of protection IP65 (IEC 60529)
• Two operator sizes: ø29 and ø40 mm
• Dark red (Munsell 5R4/12) or bright red (Munsell 7.5R4.5/14) colors are available for the operator of non illuminated emergency stop switches, and gray for stop switch operators.
• UL, c-UL recognized. EN compliant (IEC 60947-5-5, 5.2, IEC60947-5-1, 60529)

• XN Series Emergency Stop Switches

  

  30mm, 4-contact emergency stop switch.

  Padlockable and flush bezel are available.

  Features & Benefits

  • Padlockable, flush bezel, ø60mm jumbo mushroom, illuminated, LED push-on are available.
  • IDEC’s original “Safe break action” and reverse energy structure ensure the highest level of safety.
  • Safety lock mechanism (IEC 60947-5-5, 6.2)
  • Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC60947-5-1)

  XW Series Emergency Stop Switches

  

  22mm, 4-contact Emergency Stop Switch.

  IP65/IP20 degree of protection

  Features & Benefits

  • The depth behind the panel is only 37.1mm for 1 to 4 contacts (screw terminal style 48.7mm with terminal cover).
  • The same depth behind the panel for illuminated and non-illuminated switches.
  • IDEC’s original “Safe break action” ensures that the contacts open when the contact block is detached from the operator.
  • 1 to 4NC main contacts and 1 or 2NO monitor contact
  • Push-to-lock, Pull or Turn-to-reset operator
  • Direct opening action mechanism (IEC60947-5-5, 5.2, IEC60947-5-1, Annex K)
  • Safety lock mechanism (IEC60947-5-5, 6.2)
  • Degree of protection IP65 (IEC60529)
  • Screw terminal style is finger-safe (IP20).
  • Two operator sizes: ø40 and ø60mm
  • Dark red (Munsell 5R4/12) or bright red (Munsell 7.5R4.5/14) colors are available for the non-illuminated operator.
  • Push-ON illumination available (operator size: ø60)
  • Connector style available to reduce wiring time and wiring mistakes.
  • UL c-UL listed. EN compliant

  XW Series Emergency Stop Switches (Mechanical Indicator)

  

  High level of safety with Safe Break Action.

  Mechanical indicator on the operator body shows the contact status.

  Features & Benefits

  • IDEC’s original “Safe Break Action” and “Reverse Energy Structure” ensure the safety of operator and system, when the switch is damaged due to excessive shocks.
  • The mechanical indicator on the operator body shows the normal/latched status (green: normal). Reduces maintenance work and improves operation efficiency.
  • Illuminated model also available (same size as non-illuminated)
  • The depth behind the panel is only 46.4mm (w/terminal cover).
  • 1 to 4NC main contacts and 1 or 2NO monitor contact
  • Push-to-lock, Pull or Turn-to-reset operator
  • Direct opening action mechanism (IEC 60947-5-5, 5.2, IEC 60947-5-1, Annex K)
  • Safety lock mechanism (IEC 60947-5-5, 6.2)
  • Degree of protection: IP65 (IEC 60529)
  • Durable gold-plated contacts
  • Finger-safe structure (IP20)
  • UL, c-UL listed. EN compliant
  • UL NISD category

  YW Series Emergency Stop Switches

  

  Unique safety mechanism.

  22 mm hole size with IP65 degree of protection

  Features & Benefits

  • Space-saving, 10mm thick contact blocks. Removable operator.
  • Compact and light-weight.
  • Metal bezel, unibody pilot lights, and key selector switches available.
  • Separate contact block makes installation and removal easy.
  • IP65 (panel front) (IEC 60529)

  HT3P Series Safety Commander
  Safety Commander.

  Added safety features to tablets on the production floor.

  Features & Benefits

  • Easy to add safety functions(an enabling switch and emergency stop switch) to general- purpose tablets
  • Usable with tablets of various size:
    ➢Adjustable docking structure enables use with screen sizes of 8 to 11 inches
    thickness of 10 to 24mm
  • Adapts to both vertical and horizontal use as a rotating holder is equipped
  • Operability regardless of handedness:
    ➢Ergonomic grip holder design and enabling switch position result in ease of holding
    and operability
  • No worries about losing tablet battery power as a type CUSB charging port is equipped
  • IP54 protection: suitable to be used even in harsh environment
  • Rugged construction with drop resistance of 1.2 meters