Pilot Lights Buzzers

Mô tả

Pilot Lights/ Buzzers

30mm TWN Series Pilot Lights

Highly Reliable

Heavy duty switches offer both variety and reliability. Endures harsh environments.

Features & Benefits

Heavy duty control units offer both variety and reliability.
Endures harsh environments.
IP65 (IEC 60529)

30mm TWND Series Pilot Lights

IP65 degree of protection

Heavy duty switches offer both variety and reliability. Endures harsh environments.

Features & Benefits

Degree of protection: IP65 (IEC 60529)
UL, CSA approved, and EN compliant

A1 Series Pilot Lights

Bright LED illumination

Short 22-mm-long body miniature switches with LED illumination face and snap-action switching.

Features & Benefits

Bright and clear LED illumination.
Unibody, 22mm short body.
UL recognized, CSA certified.

A2 Series Pilot Lights

IP65/IP40 degree of protection

Short 22-mm-long body miniature switches with LED illumination face and snap-action switching.

Features & Benefits

Bright and clear LED illumination.
Unibody, 22mm short body.
UL recognized, CSA certified.
A6 Series Pilot Lights

IP65 degree of protection

Short 22mm body length.
Features & Benefits

Light duty in short 22mm body length. Suitable for a wide variety of office and factory applications.

The LED lamp contains a current limiting resistor and a diode for protection against reverse connection.

Degree of protection: IP40/IP65 (IEC 60529)
A8 Series Pilot Lights

IP40 degree of protection

Short 22-mm-long body miniature switches with LED illumination face and snap-action switching.
Features & Benefits

Bright and clear LED illumination.

Unibody, 22mm short body.

UL recognized, CSA certified.
AP Series Pilot Lights

IP65/IP40 degree of protection

Super bright LEDs with built-in current-limiting resistor and reverse polarity protection diode.
Features & Benefits

Super Bright LEDs with built-in current-limiting resistor and reverse polarity protection diode.

Space saving miniature style.

Illumination colors: amber, blue, green, pure white, red, white, and yellow (blue and pure white available for AP8M and AP1M only).

IP40 (ø8 mm), IP65 (ø10, 12, 16 mm) (IEC 60529)
AP22 LED Pilot Lights

Ultra-bright, sunlight viewable LED indicators.
Features & Benefits

Colored and clear lenses are offered.

Twice as bright as standard pilot lights when viewed from front, and up to 100 times brighter than standard pilot lights when viewed from side angles.

Great visibility even from inside a train (automatic safety fence on a train station platform)

Perfect for mounting in small or narrow surfaces.

AP6S Pilot Lights

IP65 degree of protection

Miniature Pilot Lights with Super Bright LEDs

Features & Benefits

Illumination colors: amber, blue, green, pure white, red, white, and yellow.

Round, square, rectangular, an dome.

Screw terminal and tab/solder terminal available.

IP65 (IEC 60529)

Flush Silhouette Switches CW Series Pilot Lights

Third generation safety construction

Sleek and stylish switches and pilot lights with a 2.5mm-thick bezel.

Features & Benefits

The CW series gives a sleek, stylish image to your machines or control panels. The surface is safer with less chance of unexpected operation or accidents by hitting the projections, and also is cleaner with less dust build-up.

New double contact blocks with four-contact configurations.

Short body, Double: 59.9mm (maintained: 64.6mm) Single: 39.9mm (maintained: 44.6mm)

Switching capacity is 120V AC, 10A (resistive load). The compact style requires less depth behind the panel. Can be used with IDEC’s FB and other 22mm control boxes. No transformer needed for any voltage.

DEC’s original two-action push-turn locking lever provides a higher level of safety by preventing unexpected release of the locking lever. Whether the contact block is installed securely can be checked easily from the back of the panel, with the position of the locking lever.

Prevents locking lever from unexpected release or damage by trapped wires.

Finger-safe, IP20 terminal prevents electrical shock.

ø22.3mm mounting hole compliant with IEC 60947-5-1

3.5-mm operator travel for pushbuttons ensures comfortable and reliable operation.

Flush Silhouette Switches LB Series Buzzers

Smooth design cuts down on surface area

Flush bezel projects only 2mm from front of panel.

Features & Benefits

Protection degree: IP54: Steady sound at 80 dB minimum (at 0.1m)

Projects only 2mm from the panel surface. For sleek and refined style.

Removable contacts enable easy wiring.

Single board mounting reduces installation time and prevents incorrect wiring. New UP series has the same depth as LB/LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm)

Flush Silhouette Switches LB Series Pilot Lights

Removable contact block/ Single board mounting

Flush bezel projects only 2mm from front of panel.

Features & Benefits

Projects only 2mm from the panel surface. For sleek and refined style.

Removable contacts enable easy wiring.

Single board mounting reduces installation time and prevents incorrect wiring. New UP series has the same depth as LB/LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm)

Protection degree: IP65 (IEC60529)

Pushbuttons with up to 3PDT contacts.

Bright and clear illumination surface. LED illumination.

Gold-clad, cross-bar contact, or high-capacity silver contacts.

Flush Silhouette Switches LBW Series Pilot Lights

IP65 degree of protection

Large-sized operators. Flush bezel projects only 2mm from front of panel.

Features & Benefits

Projects only 2mm from the panel surface. For sleek and refined style.

Removable contacts enable easy wiring.

Single board mounting reduces installation time and prevents incorrect wiring. New UP series has the same depth as LB/LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm)

Protection degree: IP65 (IEC60529)

Pushbuttons with up to 3PDT contacts.

Black or metallic flush bezels available.

Gold-clad, cross-bar contact, or high-capacity silver contacts.

Flush Silhouette Switches LW Series Pilot Lights

Perfect for industries requiring a hygienic surface

Flush bezel projects only 2mm from front of panel.

Features & Benefits

A smooth design cuts down on the surface area preventing dust and other particles from accumulating on the machine.

Key selector switches with high-security lock mechanism. Over 60 different key variations available to choose from.

ø25.3mm round panel cut-out, 24.5mm square panel cut-out.

Collective mounting is possible.

Removable contact block with a locking lever enable easy installation even when mounted collectively.

Square illuminated pushbuttons also available with switch guards.

Gold (gold-clad silver) or silver contacts.

Degree of protection: IP65 (IEC 60529)

UL recognized and CSA certified. EN compliant.

H6 Series Pilot Lights

Ideal for heavy duty applications such as machine tools.

Features & Benefits

Separate contact block makes installation and removal easy.

Large operators: bezel size (ø24mm, 24×24 mm)

High operating force and long stroke prevent inadvertent operation.

Contact blocks can be removed when units are mounted collectively.

Shock- and vibration-resistant rugged design.

Degree of protection: IP65

UL recognized, CSA certified

EN compliant (EN 60947-1, EN 60947-5-1, TÜV approved)

HW Series Pilot Lights

Finger-safe contact blocks

Ensure safety and save wiring time.

Features & Benefits

Spring-up screw and finger-safe (IP20) contact blocks are available.

Self-cleaning rolling action contacts have a raked contact surface.

Dual pushbutton switches available with two pushbuttons and a pilot light integrated into one space-saving control unit.

Pilot light with short depth behind the panel (30.5mm) available.

IP65 (IEC 60529) (dual pushbutton: IP40) UL recognized, CSA certified

EN compliant (EN 60947-1, EN 60947-5-1, TUV approved)

HW1Z Illuminated / Non-Illuminated Buzzers

Suitable for a wide variety of office & factory application

22mm illluminated buzzers and non-illuminated buzzers with functions of pilot light and buzzer integrated into one. Complies with the new EU elevator safety standard. IP65 waterproof.

Features & Benefits

HW1Z’s IPX3 waterproof characteristics can be used in emergency situations exposed to water.

With waterproof and dustproof construction, HW1Z can be used in semi-outdoor applications such as elevators exposed to rain and dust.

Wiring is accomplished with push-in terminals. No tightening of screw is required.

Short, 19.7 mm depth behind panel. Can be installed in tight places.

nstalling an optional terminal rubber boot upgrades the terminal’s waterproof characteristics to IP54 without the need to use a rear enclosure.

EN81-1/2, the safety rules for the construction and installation of lifts (electric and hydraulic) were revised to EN81-20/50 in July 2014 (effective in September 2017). As GB and JIS standards will follow suit, the requirements in the new rules must be taken into consideration when designing elevators.

An audible signal at the car and a ashing light under the car shall be activated during movement. The sound level of the audible warning shall be minimum 55 dB(A) below the car at 1 m distance.

LB Series Buzzers

Removable contact blocks ideal for single board mounting.

Depth of only 27.9mm behind panel.

Features & Benefits

Steady sound at 80 dB minimum (at 0.1m), IP54 tab terminals, PC board terminals and IP40 solder terminals available

Panel depth of only 27.9mm. Removable contact blocks ideal for single board mounting. Protection degree: IP65 (IEC 60529)

Reduces the size of machines and control panels.

Removable contacts enable easy wiring.

Single board mounting reduces installation time and prevents incorrect wiring. New UP series has the same depth as LB/LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm)

Protection degree: IP65 (IEC60529)

Gold-clad, cross-bar contact, or high-capacity silver contacts.

LB Series Pilot Lights

Locking lever removable contacts

Depth of only 27.9mm behind panel. Removable contact blocks ideal for single board mounting.

Features & Benefits

Space-saving installation: Panel depth of only 27.9mm. Removable contact blocks ideal for single board mounting. Protection degree: IP65 (IEC 60529)

Reduces the size of machines and control panels.

Removable contacts enable easy wiring.

Single board mounting reduces installation time and prevents incorrect wiring. New UP series has the same depth as LB/LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm)

Protection degree: IP65 (IEC60529)

Pushbuttons with up to 3PDT contacts.

Bright and clear illumination surface. LED illumination.

Gold-clad, cross-bar contact, or high-capacity silver contacts.

LD6A SignaLight Towers

Ergonomically designed for visual & audible recognition

Oval shape with striped design. Presents a stylish image on all equipment.

Features & Benefits

Different mounting styles: L- shaped bracket available for pole mounting. Can also be mounted directly to equipment. Five mounting styles available.

Easy assembly: unique secure terminal style of LED module makes assembly quick and easy, enabling assembly using only one hand.

Plug-in terminal: highly reliable plug-in terminals, easy expansion of LED module

Flashing cycle complies with IEC standards: 1.75Hz approx 105 times per second.

Unique powerful design with 360-degree sound field, two alarm sound patterns available.

Unique lens shape offers high visibility, three different illumination methods and a unique lens shape enable high visibility from all directions.

LH series Surface Mount Indicators

IP67 degree of protection

Innovative indicators in slim and stylish design. Reduces installation space.

Features & Benefits

Surface mount style does not affect the location of other components. Requires only a small space behind the mounting surface.

Integrated cable wiring ensures waterproof characteristics. 1m, 3m, and 5m cables available. M12 connector cable (30 cm) available for jumbo dome type.

IP67 (IEC60529) rated. Can be used in environments subject to washdown.

Slim design well suited for installation in small spaces.

Excellent visibility from the front and from the side.

Legends and symbols can be printed on marking film to customize flat type.

Two-color alternate illumination available for all types. Three-color alternate illumination available with jumbo dome type.

LW Series Buzzers

Designed to reduce strain injuries

Continuous / intermittent (long) / intermittent (short) sounds can be selected with a built-in slide switch.

Features & Benefits

Light touch mechanism designed to reduce strain injuries.

Endures repetitive operation suitable for food processing and packaging industries.

Pure silver or gold plated contacts.

IP65 (IEC 60529) (Buzzer: IP40)

LW Series Pilot Lights

Endures repetitive operation suitable for food processing & packaging industries

Light touch mechanism designed to reduce strain injuries.

Features & Benefits

Light touch mechanism designed to reduce strain injuries.

Endures repetitive operation suitable for food processing and packaging industries.

Pure silver or gold plated contacts.

IP65 (IEC 60529) (Buzzer: IP40)

MA Series Pilot Lights

Save labor & costs for installation

Super bright LED for AC/DC Square-, rectangular-, and round-body, miniature pilot lights.

Features & Benefits

Compact and space-saving (unibody: 22mm)

Super-bright LED unit

Gold-clad silver cross-bar contacts for low-level signal switching integrity. Also available with silver contacts.

High-performance contact mechanism.

Light-touch operation.

Built-in current limiting resistor and diode (LED)

Quick installation into panel (front mounting)

Optional barrier, switch guard, and socket.

UL/cUL-recognized, EN compliant.

MC Series Pilot Lights

IP40 degree of protection

Super bright LED lamp or incandescent lamp illumination. Rectangular and square body pilot lights

Features & Benefits

Compatible with both LED and incandescent lamps.

Super-bright LED improves visibility and saves energy.

Removable contact blocks promote easy PC board mounting.

Snap-action switching contacts.

Slow-action and maintained types are also available.

The solder terminal accepts quick connect receptacles enhancing safety and enabling easy wiring.

Illumination face division: Full to 4-way split (MC3D) or 2-way split (MC2D)

Lens and color screens can be changed easily without the need for removal of power, because contacts are not operated when the lens is first inserted into the housing.

UL and c-UL recognized, EN compliant

SLC30 Series Combination Display Light

Finger-safe spring up terminal

Highly bright “Super LED” unit improves visibility and safety.

Features & Benefits

Eight types of illumination faces to choose from. Compact combination display lights.

Super bright, super LED.

The fingersafe spring-up terminals reduce wiring time and prevent electrical shocks.

The insulated jumper, when used on fingersafe spring-up terminals, eliminates the need of terminal cover.

Legends can be engraved on the attached marking plate. One or two thin marking sheets (not attached) can also be installed (Type F only).

Spot illumination available for easy recognition in bright environment (Type F only)

UL and c-UL recognized, EN compliant.

SLC30 Series Combination Display with Switches

Reduced labor & panel space

Combination of display and switches reduce labor of switch installation and minimizes installation space.

Features & Benefits

Various control units can be installed in the window frame, with or without SLC units.

Flexibility of panel design is maximized.

Up to 30 windows (3 rows × 10 columns) can be used.

Labor and time to install switches can be reduced.

SLC40 Series Combination Display Lights

Finger-safe spring up terminal

Highly bright “Super LED” unit improves visibility and safety.

Features & Benefits

Eight types of illumination faces in 40mm size.

Extensible window ensures high visibility when installed at high places (except C, L, G).

Super bright, super LED.

The fingersafe spring-up terminals save wiring time and prevent electrical shocks.

The insulated jumper, when used on fingersafe spring-up terminals, eliminates the need of terminal cover.

Legends can be engraved on the attached marking plate. One or two thin marking sheets (not attached) can also be installed (Type F only).

Spot illumination available for easy recognition in bright environment (Type F only).

UL and c-UL recognized, EN compliant (EN60947-5-1).